Policy Update - Rules changes incoming for AI content - Read Here

Markdown Syntax

Last updated

Revision history

This page is here to help you get a better grasp on the syntax of Markdown, the text processing engine this site uses.

Inline formatting

Inline formatting is the most commonly seen type of text formatting in Markdown. It can be applied almost anywhere else and doesn’t depend on specific context (most of the time).
Operator Example Result
Bold This is **huge** This is huge
Italic *very* clever, Connor... _very..._ very clever, Connor… very…
Underline And I consider this __important__ And I consider this important
Strikethrough I am ~~wrong~~ right I am wrong right
Superscript normal text ^superscripted text^ normal text superscripted text
Subscript normal text ~subscripted text~ normal text subscripted text
Spoiler Psst! ||Darth Vader is Luke's father|| Psst! Darth Vader is Luke’s father
Code Use `**bold**` to make text bold! Use **bold** to make text bold!

Multi-line inlines

Most inline formatting can extend beyond just a single line and travel to other lines. However, it does have certain quirks, especially if you’re unused to the Markdown syntax.
**I am a very 
bold text**
Result
I am a very
bold text
However, if you try to insert a newline in the middle of it, it won’t work.
**I am not a very 

bold text**
Result
**I am not a very
bold text**
If you really need an empty line in the middle of your inline-formatted text, you must escape the line ending. In order to do so, Markdown provides us with the \ (backslash) character. Backslash is a very special character and is used for escaping other special characters. Escaping forces the character immediately after the backslash to be ignored by the parser.
As such, we can write our previous example like so to preserve the empty line:
**I am a very
\
bold text**
Result
I am a very

bold text

Combining inlines

Most inline operators may be combined with each other (with the exception of the code syntax).
_I am an italic text **with some bold in it**._
Result
I am an italic text with some bold in it.

Block formatting

Block formatting is the kind of formatting that cannot be written within a single line and typically requires to be written on its own line. Many block formatting styles extend past just one line.

Blockquotes

Philomena’s flavor of Markdown makes some changes to the blockquote syntax compared to regular CommonMark. The basic syntax is a > followed by a space.
> quote text
quote text

Please note, that if > is not followed by a space, it will not become a blockquote!
>not a quote
>not a quote

Same goes for >>, even if followed by a space.
>> not a quote
>> not a quote

You may continue a quote by adding > followed by a space on a new line, even if the line is otherwise empty.
> quote text
> 
> continuation of quote
quote text
continuation of quote

To nest a quote, simply repeat > followed by a space as many times as you wish to have nested blockquotes.
> quote text
> > nested quote
> > > even deeper nested quote
quote text
nested quote
even deeper nested quote

Headers

Markdown supports adding headers to your text. The syntax is # repeated up to 6 times.
# Header 1
## Header 2
### Header 3
#### Header 4
##### Header 5
###### Header 6

Header 1

Header 2

Header 3

Header 4

Header 5
Header 6

Code block

Another way to write code is by writing a code block. Code blocks, unlike inline code syntax, are styled similar to blockquotes and are more appropriate for sharing larger snippets of code. In fact, this very page has been using this very structure to show examples of code.
```
<div>
  <h1>Hello World!</h1>
</div>
```
<div>
  <h1>Hello World!</h1>
</div>
Code blocks may also use tildes (~) instead of backticks (`).
~~~
code block
~~~
code block

Links

Links have the basic syntax of
[Link Text](https://example.com)
Most links pasted as plaintext will be automatically converted into a proper clickable link, as long as they don’t begin with dangerous protocols.
As such…
https://example.com
On-site links may be written as either a relative or absolute path. If the on-site link is written as the absolute path, it will be automatically converted into a relative link for the convenience of other users.
[Link to the first image](https://derpibooru.org/images/0)
[Link to the first image](/images/0)

On-site images

If you wish to link an on-site image, you should use the >>:id syntax. It respects filters currently in-use by the reader and spoilers content they do not wish to see.
You should always use this for on-site uploads! (as this will let other users filter the image if they wish to, and it is against the rules to not show content with care)
Here’s a brief explanation of its usage.
Operator Description of result
>>123 Simple link to image
>>123s Small (150x150) thumbnail of the image
>>123t Regular (320x240) thumbnail of the image
>>123p Preview (800x600) size of the image

External images

Some images you may wish to link may not exist on the site. To link them Markdown provides us with a special syntax. All images embedded this way are proxied by our image proxy (Go-Camo).
![](https://furrycdn.org/img/view/2020/11/6/45009.png)
You may control the size of your externally-linked image by specifying the alt text. Certain keywords are recognized as size modifiers. The modifiers are case-sensitive!
Modifier Resulting size
tiny 64x64
small 128x128
medium 256x256
large 512x512
(anything else) (actual size of the image)
![tiny](https://furrycdn.org/img/view/2020/11/6/45009.png)
![small](https://furrycdn.org/img/view/2020/11/6/45009.png)
![medium](https://furrycdn.org/img/view/2020/11/6/45009.png)
![large](https://furrycdn.org/img/view/2020/11/6/45009.png)
![](https://furrycdn.org/img/view/2020/11/6/45009.png)
tiny
small
medium
large

Image links

To make an image link, simply combine the external image syntax with the link syntax.
[![](https://furrycdn.org/img/view/2020/11/6/45009.png)](https://furbooru.org/images/45009)

Lists

Unordered list

Unordered lists can be written fairly intuitively, by putting one of the special characters in front of each line that should be a part of the list.
Shopping list:
* Milk
* Eggs
* Soda
Shopping list:
You may use any of the following characters at the beginning of the line to make an unordered list:
*
+
-
Lists may be nested and have sublists within them. Simply prefix your sublist items with three spaces while within another list.
* Item one
* Item two
   * Sublist item one
   * Sublist item two

Ordered list

To write an ordered list, simply put a number at the beginning of the line followed by a dot or closing bracket. It doesn’t actually matter which order your numbers are written in, the list will always maintain its incremental order. Note the 4 in the example, it isn’t a typo.
1. Item one
2. Item two
4. Item three
  1. Item one
  2. Item two
  3. Item three
Ordered lists cannot be sublists to other ordered lists. They can, however, be sublists to unordered lists. Unordered lists, in turn, may be sublists in ordered lists.
1) Item one
2) Item two
   * Sublist item one
   * Sublist item two
  1. Item one
  2. Item two
    • Sublist item one
    • Sublist item two

Tables

Philomena’s Markdown implementation supports GitHub-style tables. This isn’t a part of the core Markdown specification, but we support them. The colons are used to specify the alignment of columns.
| Left         | Center         | Right         |
| ------------ |:--------------:| -------------:|
| left-aligned | center-aligned | right-aligned |
| *formatting* | **works**      | __here__      |
Left Center Right
left-aligned center-aligned right-aligned
formatting works here
In tables, the pipes (|) at the edges of the table are optional. To separate table head from body, you need to put in at least three - symbols. As such, example above could have also been written like so:
Left | Center | Right
--- | :---: | ---:
left-aligned | center-aligned | right-aligned
*formatting* | **works** | __here__
Left Center Right
left-aligned center-aligned right-aligned
formatting works here

Escaping the syntax.

Sometimes you may wish certain characters to not be interpreted as Markdown syntax. This is where the backslash comes in! Prefixing any markup with a backslash will cause the markup immediately following the backslash to not be parsed, for example:
\*\*grr grr, I should not be bold!\*\*
**grr grr, I should not be bold**
Code blocks and code inlines will also escape the syntax to a limited extent (except for backticks themselves).
`**not bold!**`
**not bold!**